TCP / IP :

TCP/IP is an industry-standard protocol suit for Wide Area Networks (WANs) developed in the 1970s and 1980 by the U.S Department of Defense (DoD). TCP/IP ( transmission control protocol / Internet protocol ) is a routable protocal that is suitable for connecting dissimilar system in heterogeneous networks. It is the protocol of the worldwide network known as the Internet.

Your IP Address

How To Work TCP / IP ?

TCP ( Transmission control protocol ) and IP ( Internet protocol ). he Internet Protocol standard dictates the logistics of packets sent out over networks, it tells packets where to go and how to get there. IP has a method that lets any computer on the Internet forward a packet to another computer that is one or more intervals closer to the packet's recipient. You can think of it like workers in a line passing boulders from a quarry to a mining cart.

The Transmission Control Protocol is responsible for ensuring the reliable transmission of data across Internet-connected networks. TCP checks packets for errors and submits requests for re-transmissions if any are found.

Most common TCP/IP protocols :

ProtocolTCP/UDPPort NumberDescription
File Transfer Protocol (FTP)

(RFC 959)
TCP 20 / 21 FTP is one of the most commonly used file transfer protocols on the Internet and within private networks. An FTP server can easily be set up with little networking knowledge and provides the ability to easily relocate files from one system to another. FTP control is handled on TCP port 21 and its data transfer can use TCP port 20 as well as dynamic ports depending on the specific configuration.
Secure Shell (SSH)

(RFC 4250-4256)
TCP 22 SSH is the primary method used to manage network devices securely at the command level. It is typically used as a secure alternative to Telnet which does not support secure connections.
Telnet (RFC 854) TCP 23 Telnet is the primary method used to manage network devices at the command level. Unlike SSH which provides a secure connection, Telnet does not, it simply provides a basic unsecured connection. Many lower level network devices support Telnet and not SSH as it required some additional processing. Caution should be used when connecting to a device using Telnet over a public network as the login credentials will be transmitted in the clear.
Simple Mail Transfer Protocol (SMTP)

(RFC 5321)
TCP 25 SMTP is used for two primary functions, it is used to transfer mail (email) from source to destination between mail servers and it is used by end users to send email to a mail system.
Domain Name System (DNS)

(RFC 1034-1035)
TCP / UDP 53 The DNS is used widely on the public internet and on private networks to translate domain names into IP addresses, typically for network routing. DNS is hieratical with main root servers that contain databases that list the managers of high level Top Level Domains (TLD) (such as .com). These different TLD managers then contain information for the second level domains that are typically used by individual users (for example, cisco.com). A DNS server can also be set up within a private network to private naming services between the hosts of the internal network without being part of the global system.
Dynamic Host Configuration Protocol (DHCP)

(RFC 2131)
UDP 67 / 68 DHCP is used on networks that do not use static IP address assignment (almost all of them). A DHCP server can be set up by an administrator or engineer with a poll of addresses that are available for assignment. When a client device is turned on it can request an IP address from the local DHCP server, if there is an available address in the pool it can be assigned to the device. This assignment is not permanent and expires at a configurable interval; if an address renewal is not requested and the lease expires the address will be put back into the poll for assignment.
Trivial File Transfer Protocol (TFTP)

(RFC 1350)
UDP 69 TFTP offers a method of file transfer without the session establishment requirements that FTP uses. Because TFTP uses UDP instead of TCP it has no way of ensuring the file has been properly transferred, the end device must be able to check the file to ensure proper transfer. TFTP is typically used by devices to upgrade software and firmware; this includes Cisco and other network vendors’ equipment.
Hypertext Transfer Protocol (HTTP)

(RFC 2616)
TCP 80 HTTP is one of the most commonly used protocols on most networks. HTTP is the main protocol that is used by web browsers and is thus used by any client that uses files located on these servers.
Post Office Protocol (POP) version 3

(RFC 1939)
TCP 110 POP version 3 is one of the two main protocols used to retrieve mail from a server. POP was designed to be very simple by allowing a client to retrieve the complete contents of a server mailbox and then deleting the contents from the server.
Network Time Protocol (NTP)

(RFC 5905)
TCP 123 One of the most overlooked protocols is NTP. NTP is used to synchronize the devices on the Internet. Even most modern operating systems support NTP as a basis for keeping an accurate clock. The use of NTP is vital on networking systems as it provides an ability to easily interrelate troubles from one device to another as the clocks are precisely accurate.
NetBIOS

(RFC 1001-1002)
TCP / UDP 137 / 138 / 139 NetBIOS itself is not a protocol but is typically used in combination with IP with the NetBIOS over TCP/IP (NBT) protocol. NBT has long been the central protocol used to interconnect Microsoft Windows machines.
Internet Message Access Protocol (IMAP)

(RFC 3501)
TCP 143 IMAP version3 is the second of the main protocols used to retrieve mail from a server. While POP has wider support, IMAP supports a wider array of remote mailbox operations which can be helpful to users.
Simple Network Management Protocol (SNMP)

(RFC 1901-1908, 3411-3418)
TCP / UDP 161 / 162 SNMP is used by network administrators as a method of network management. SNMP has a number of different abilities including the ability to monitor, configure and control network devices. SNMP traps can also be configured on network devices to notify a central server when specific actions are occurring. Typically, these are configured to be used when an alerting condition is happening. In this situation, the device will send a trap to network management stating that an event has occurred and that the device should be looked at further for a source to the event.
Border Gateway Protocol (BGP)

(RFC 4271)
TCP 179 BGP version 4 is widely used on the public internet and by Internet Service Providers (ISP) to maintain very large routing tables and traffic processing. BGP is one of the few protocols that have been designed to deal with the astronomically large routing tables that must exist on the public Internet.
Lightweight Directory Access Protocol (LDAP)

(RFC 4510)
TCP / UDP 389 LDAP provides a mechanism of accessing and maintaining distributed directory information. LDAP is based on the ITU-T X.500 standard but has been simplified and altered to work over TCP/IP networks.
Hypertext Transfer Protocol over SSL/TLS (HTTPS)

(RFC 2818)
TCP 443 HTTPS is used in conjunction with HTTP to provide the same services but doing it using a secure connection which is provided by either SSL or TLS.
Lightweight Directory Access Protocol over TLS/SSL (LDAPS)

(RFC 4513)
TCP / UDP 636 Just like HTTPS, LDAPS provides the same function as LDAP but over a secure connection which is provided by either SSL or TLS.
FTP over TLS/SSL

(RFC 4217)
TCP 989 / 990 Again, just like the previous two entries, FTP over TLS/SSL uses the FTP protocol which is then secured using either SSL or TLS.

Note: UDP (User Datagram Protocol) is an alternative communication protocol (TCP) used primarily for establishing low-latency and loss-tolerating connection between applications on the Internet.

Domain names with TCP/IP addresses :

The TCP/IP address for a website or web server is typically not easy to remember. To remedy this issue, a domain name is used instead. For example: 216.58.216.164 is one of the IP address for Google and google.com is the domain name.

Next Update

Loading...

Friend's some reason we need some long time for next update, Sorry For Long Time, see you soon.

We make a Collaboration with HackIsOn YouTube Channel So, Please Subscribe Their Channel and keep supporting